Hydraulics Supplier

Home > Products > Directional Control Valves > DSHG-04

	DSHG-04 Series
	Solenoid Control, Pilot Operated Directional Valves
	mounting interface	CETOP 7
	max. pressure	315 bar (4,570 psi)
	max. flow	300 ℓ/min (79.3 US gpm)

Features

Spool types

Order code

Installation

pdf catalogue

Features –

Mounting interface	CETOP 7 (ISO 4401-ADE-07-4-A, NG25)
Max. flow	300 ℓ/min (79.3 US gpm)
Max. pressure	315 bar (4,570 psi) T port 210 bar (3,050 psi)
Max. frequency	120 cycles/min
Protection class	IP65
Temperature	-15 ~ +70˚C; Viscosity 15 ~ 400 mm2/s
Mass	8.2 kg (single solenoid); 8.8 kg (double solenoid)

Solenoid Rating (Dual frequency coils, all AC voltage coils are 50 Hz unless specified)
Electric Source	Voltage (V)		Inrush (A)	Holding (A)	Power (W)
Electric Source	Source Rating	Serviceable Range	at 100% voltage		Power (W)
120 VAC	120 VAC (70 Hz)	96 ~ 132	4.48	0.75	29
240 VAC	240 VAC (70 Hz)	192 ~ 264	2.24	0.37
12 VDC	12 VDC	10.8 ~ 13.2	N/A	3.16
24 VDC	24 VDC	21.6 ~ 26.4		1.57
48 VDC	48 VDC	43.2 ~ 52.8		0.38
R100	Rectified AC›DC 100V	90 ~ 110		0.43
R200	Rectified AC›DC 200V	180 ~ 220		0.21

Spool Types -

Functional Symbols
Spring Offset Single Solenoid, Two Position (End to Centre, solenoid at port B end)

	2B2	2B3	2B4	2B40
Spring Offset Single Solenoid, Two Position (End to Centre, solenoid at port B end)
Standard Models (Right-hand Build)
	2B2A	2B2B	2B3A	2B3B	2B4A

	2B4B	2B60A	2B60B	2B9B	2B10B

	2B11B	2B12B
Spring Offset Single Solenoid, Two Position (End to Centre, solenoid at port B end)
Reverse Mount Models (Left-hand Build)
	2B4B-L	2B40B-L	2B5B-L	2B9B-L	2B10b-L

	2B11B-L	2B12B-L
Spring Centred Double Solenoid, Three Position

	3C2	3C3	3C4	3C40	3C5

	3C60	3C9	3C10	3C11	3C12
No-Spring detented Double Solenoid, Two Position

	2N2	2N3	2N4	2N40
Shockless Type Solenoid Pilot Operated Directional Control Valves

	3C2	3C4	3C40

	3C60	3C10	3C12

Order Code -

F	-	S	-	DSHG	-	04	-	2	B	2	B	-	E	T	-	R2	-	A240	-	C	-	N1	-	52	-	L
1		2		3		4		5	6	7	8		9	10		11		12		13		14		15		16

Example

DSHG-04-3C2-A240-N1-52

CETOP 7, 3 position, spring centred, all ports blocked in natural position, internal pilot, external drain, 240 VAC, DIN connector plugs

1. Fluid compatibility
Omit for anti-ware hydraulic oil
For Phosphate, Ester type fluid application

2. Soft Shift Type
Omit for standard valve
(S) For Shockless valve

3. DSHG series
High Performance solenoid control pilot operated directional valve

4. Mounting interface
(04) CETOP 7

5. No. of position
(2) Two position
(3) Three position

6. Spring setting
(B) Spring off-set
(C) Spring centred
(N) No-spring Detented

7. Spool type
See functional symbol above

8. Spring off-set position
Omit for end to end
(A) End to centre, P to A when
piloted
(B) End to centre, P to B when
piloted

9. Pilot control
Omit for end to end
(E) External pilot

10. Drain control
Omit for end to end
(T) Internal pilot

11. Slave spool control
Omit for not required
(R2) Stoke adjustment on both ends
(RA) Stoke adjustment on A end
(RB) Stoke adjustment on B end
(P2) With pilot piston on both ends
(PA) With pilot piston on A end
(PB) With pilot piston on A end

12. Coil rating
AC Current (50Hz and 60Hz)
(A100) 100 VAC
(A120) 120 VAC
(A200) 200 VAC
(A240) 240 VAC

12. Coil rating (continue)
DC Current
(D12) 12 VDC
(D24) 24 VDC
(D48) 48 VDC
Rectified current
(R100) 100 VAC to 100 VDC
(R200) 200 VAC to 200 VDC

13. Manual override
Omit with manual override push pin
(C) With push button & lock nut

14. Electrical connection
Omit for terminal conduct box
(N) DIN plug (43650) Hirschmann plug
(N1) DIN plug with LED indicator (DC) Current with surge protection

15. Design no.
(52) High performance
Max. flow 300 ℓ/min
Max. pressure 315 bar

16. Solenoid left-hand built
Omit for standard valve
(L) Left-hand build

Home | Top | Products | Contact us